Rely on LynTec everywhere there is Pro AVL.

LynTec XPC Standalone Controller
The newly released XPC Xtend Power Control Series brings the power control flexibility and reliability to smaller installations that users of our wall mounted relay and motorized circuit breaker panels have appreciated since 1992. The XPC controller allows a user to install, program and operate our Xtend power control modules as standalone system.The Xtend power control modules require an RPC series controller to operate. The modules were created to extend the reach of installed NPAC rack-mounted relay panels, RPCR wall-mounted relay panels or the RPC series motorized circuit breaker panels, all of which contain a built in RPC series control board. The XPC Controller has an RPC series control board built in as well, this allows AVL professionals to deploy the Xtend power control modules and integrate them together to build a standalone power control system. Regardless of the size of your venue, the number of zones, and your control sequencing needs, LynTec’s standalone controller can be used to remotely control all your AVL equipment.What’s the advantage of this new controller?

  • A LynTec XPC Standalone Controller is required to operate Xtend power control modules if an RPC, RPCR or NPAC panel is not onsite.
  • The XPC controller can implement up to 12 zones and can control every zone separately with a unique protocol.
  • It interfaces with sACN, DMX, Telnet, IP, Telnet, or contact closure control systems
  • Easy to install
  • User-friendly
  • Built-in timer for automated control
  • Load shedding at the circuit level for emergency off

This innovative controller works with the following Xtend Power Control Modules. All of the Xtend modules can be mixed and matched to create a custom solution that works for you. The XPC Standalone Controller is required to control the following modules if your venue does not have an existing RPC, RPCR, or NPAC installation.

  • XRM 20 Relay Module
    A standalone 20-amp cube enclosure with two independent relays to control the two onboard duplex plugs.
    5.50”H x 6.40”W x 3.75”D
  • XRM 30 Relay Module
    A standalone 30-amp cube enclosure with a single relay switch that controls a single 30A L5-30 receptacle.
    9”H x 6”W x 4”D
  • XRS 20 Rack Sequencer
    A 1RU rack-mounted enclosure powered from a 20-amp circuit to control three duplex receptacles, each with dedicated relay switch for onboard sequencing. Includes line conditioning and surge protection.
    1.75”H x 19”W x 7”D
  • XRS 80 vertical Rack Sequencer
    A hardwired vertical rack-mounted strip, managing up to four 20-amp circuits for powering four corresponding duplexes, each with dedicated switch for onboard control. 32”L x 3.5”W x 2”D

NPAC GUI ScreenshotControl at Your Fingertips on Internet-Connected Devices
  • Built-in web server with browser interface
  • Set up, control and monitor via smart phone, tablet or computer
  • Interfaces with IP, Telnet, DMX, sACN or contact closure control systems
Protect AVL Equipment and Prolong Lifespan
  • Built-in astronomical clock for automated on/off and scheduling 84 events
  • Integrated over- and under-voltage protection for emergency shut down and controlled restart
  • Circuit selectable emergency override input