DMX Lighting Control Panel with Controllable Circuit Breakers

Have as many DMX controlled circuits as you need in one power panel. You can mix DMX controlled motorized branch breakers and standard QO breakers together for a single power panel solution. The panelboard is big and roomy with lots of space to work (250% more room than a load center), which makes it the electricians’ favorite! Big as it is, the LCP still saves valuable wall space when compared to traditional relay-based control systems. The LCP comes with 200% neutrals to reduce neutral overheating caused by switch-mode power supplies. The LCP series also offers bolt-on breakers as an option to traditional plug-on models, and can control one, two or three pole breakers.

  • DMX 512 control standard in all panels, a simple jumper system sets your addressing
  • Control circuits individually or in zoned group
  • Simplest control set-up and operation in the industry
  • No on-site commissioning or factory start-up required
  • Emergency auto-on feature for egress lighting standard (ETL listed UL 924)
  • SurgeX in-panel surge elimination modules – optional
  • Saves space compared to breaker panel + relay panel
  • Saves redundant installation and hardware costs!
  • Energy efficient – NO holding current or heat sinks required to maintain state – Runs cool, lasts long!
ETL_Safety

Three Phase:

LCP 338-xx (for main breakers <100A)

LCP 341-xx (for main breakers 125A-225A)

LCP 341-xx M400 (400A main breaker)

Specifiying in 5 easy steps

  1. Choose the control method MS=Sequencing, LC=DMX512, and SC=RS-232
  2. Choose the cabinet style: P for panelboard
  3. Choose three phase (3) or single phase (1)
  4. Choose the number of circuits: 38 or 41 (38 circuits if the main size is 100A or less–see below)
  5. Choose the maximum number of controlled circuits: 12, 24, 36, or 48 for MS and 10,20, 30, 40,or 50 for LC and SC

EXAMPLE: LCP 341-30 = a 3 phase DMX controlled panel board with 41 circuits (30 max controlled)

Comprehensive Specifier’s Guide adobe-logo.jpg

 IPC Integrated Power Center

The RPC is also available in an integrated enclosure that combines an isolation transformer and up to 84 circuit breakers into a single standing floor unit.  Each panel is custom built to your specification.  Call or write for more information.

LC-10 Series

Each motorized breaker is DMX512 addressable via a simple set of jumpers on the LynTec control board. Once the DMX address starting point is set by inserting the jumper, each motorized breaker has the next sequential address assigned to it (one address per breaker), the DMX operator can then program the breaker addresses for individual control. The LynTec control boards only use as many addresses as there are motorized breakers connected to it, this saves valuable DMX addresses for other equipment. DMX commands for each breaker are on, off or no change.

MB and BMB Series Motorized Breakers

Available in 15, 20 and 30 Amps, one, two and three poles.

For complete mototized breaker details click here.

Brochure for all LCP Panels

Architects and Engineers Specs for all LCP Panels – PDF or Word

Three Phase:

LCP 341-M225:   Panel Planner, Design and Specification, Submittals

LCP 341-M400:   Panel Planner, Design and Specification, Submittals

Full Catalog

Optional Features

HIgh Current Option

SurgeX Option

IPC Integrated Power Center Option

Click thumbnail to view.

Integrated Power Center - Single Cabinet Solution

Integrated Power Center – Single Cabinet Solution

See the IPC at a glance – an elegant way to package a very common panelboard(s) + transformer design.

Power Control Simplified

Power Control Simplified

LynTec Panel Basics: Why a controllable breaker panel?

Square D motorized branch circuit breakers plus LynTec customized control electronics provides the most elegant electrical power control platform.

Building a Motorized Breaker Panel System Part Number

Building a Motorized Breaker Panel System Part Number

In this video we describe how to create a system part number for a LynTec motorized circuit breaker panel. We cover panel, control board and motorized breaker options.

Controllable Motorized Circuit Breaker Tutorial

Controllable Motorized Circuit Breaker Tutorial

LynTec uses Square D manufactured remotely operated motorized branch circuit breakers to build custom AC power control systems for the pro A/V industry.