RS-232 Remote Control Circuit Breaker Panel
Have as many RS-232 controlled circuits as you need in one power panel. You can mix RS-232 controlled motorized branch breakers and standard QO breakers together for a single power panel solution. The panelboard is big and roomy with lots of space to work (250% more room than a load center), which makes it the electricians’ favorite! Big as it is, the SCP still saves valuable wall space when compared to traditional relay-based control systems. The SCP comes with 200% neutrals to reduce neutral overheating caused by switch-mode power supplies. The SCP series also offers bolt-on breakers as an option to traditional plug-on models, and can control one, two or three pole breakers.
Single Phase:
SCP 139-xx (for main breakers <100A)
SCP 141-xx (for main breakers >100A)
Three Phase:
SCP 338-xx (for main breakers <100A)
SCP 341-xx (for main breakers >100A)
Specifiying in 5 easy steps
- Choose the control method MS=Sequencing, LC=DMX512, and SC=RS-232
- Choose the cabinet style: P for panelboard
- Choose three phase (3) or single phase (1)
- Choose the number of circuits: 38 or 41 (38 circuits if the main size is 100A or less)
- Choose the maximum number of controlled circuits: 12, 24, 36, or 48 for MS and 10,20, 30, 40,or 50 for LC and SC
EXAMPLE: SCP 341-20 = a 3 phase RS-232 controlled panel board with 41 circuits (20 max controlled)
SCP 341-30 = a 3 phase RS-232 controlled panel board with 41 circuits (30 max controlled)
IPC Integrated Power Center
The RPC is also available in an integrated enclosure that combines an isolation transformer and up to 84 circuit breakers into a single standing floor unit. Each panel is custom built to your specification. Call or write for more information.
SC-10 Series
Each motorized breaker is RS-232 addressable via a simple set of jumpers on the LynTec control board. Once the RS-232 address starting point is set by inserting the jumper, each motorized breaker has the next sequential address assigned to it (one address per breaker), the RS-232 operator can then program the breaker addresses for individual control. The LynTec control boards only use as many addresses as there are motorized breakers connected to it, this saves valuable RS-232 addresses for other equipment. RS-232 commands for each breaker are on, off or no change.
Move your mouse over the red dots 
to see all of the great features.
MB and BMB Series Motorized Breakers
Available in 15, 20 and 30 Amps, one, two and three poles.
For complete mototized breaker details click here.
Architects and Engineers Specs for all SCP Panels – PDF or Word
Single Phase:
SCP 139: Panel Planner, Design and Specification, Submittals
SCP 141: Panel Planner, Design and Specification, Submittals
Three Phase:
SCP 338: Panel Planner, Design and Specification, Submittals
SCP 341: Panel Planner, Design and Specification, Submittals
Emergency Off and Brownout Programming Guide
Full Catalog
Click thumbnail to view.
Integrated Power Center – Single Cabinet Solution
See the IPC at a glance – an elegant way to package a very common panelboard(s) + transformer design.
Power Control Simplified
LynTec Panel Basics: Why a controllable breaker panel?
Square D motorized branch circuit breakers plus LynTec customized control electronics provides the most elegant electrical power control platform.
Building a Motorized Breaker Panel System Part Number
In this video we describe how to create a system part number for a LynTec motorized circuit breaker panel. We cover panel, control board and motorized breaker options.
