XPC
A modular system of remote relay modules and controllers for flexible, distributed power control and sequencing.
Filter Products
Types
+Power Distribution
+Power Control
+Power Accessories
+Statuses
+Series
+Product Region
+ABOUT THE XPC SERIES
Intelligent power control, extended anywhere.
The XPC series decouples power control from the panel, enabling you to place network-managed relays exactly where your distributed equipment is located.
The XPC system is built around a standalone controller that manages a network of remote relay modules over standard IP infrastructure. This modular architecture allows integrators to control circuits for equipment like line arrays, digital signage, or motorized rigging without pulling dedicated home runs back to a central panel. Modules are available in various form factors, including compact cubes (XRM/XRL) and rack-mount strips (XRS), to handle 20A or 30A loads.
Each XPC system can operate independently or integrate as an extension of an existing LynTec RPC, RPCR, or NPAC installation. Configuration is managed through a simple, built-in web server, providing full control over sequencing, scheduling, and voltage protection settings. With support for IP, DMX, and sACN, the XPC series provides a flexible solution for complex power control challenges.
WHY IT MATTERS
Decentralized control, simplified integration.
01
Place power control exactly where you need it.
Install compact relay modules (XRM, XRL) near remote equipment to reduce conduit runs and simplify wiring. This modular approach provides greater design flexibility and lowers installation costs.
02
Deploy as a standalone system or extend existing panels.
Use the XPC Controller for a new installation or connect modules to an existing RPC, RPCR, or NPAC panel. This provides a consistent control ecosystem and a scalable path for facility upgrades.
03
Browser-based setup with built-in equipment protection.
Configure sequencing, scheduling, and control triggers through a simple web interface. Integrated over and under-voltage protection automatically safeguards connected equipment from power anomalies.
FAQ
Your questions, answered.
Common questions about deploying the XPC modular power control system.
Can XPC modules be added to an existing LynTec panel installation?
Yes. XPC remote relay modules are designed to integrate seamlessly with existing RPC, RPCR, or NPAC panel installations. They connect to the network and are controlled by the main panel’s controller, acting as a direct extension of the system. This allows you to add controlled circuits in remote locations while maintaining a single, unified control and sequencing ecosystem for the facility.
Does the XPC system require a main LynTec panel to operate?
No, the XPC system can be deployed as a completely standalone solution. The XPC Standalone Controller manages its own network of remote relay modules (XRM, XRL, XRS), providing a self-contained power control and sequencing system. This makes it an excellent choice for new installations or isolated areas that are not tied to a central LynTec panel infrastructure.
How can I sequence power for equipment located far from the main panel?
The XPC Xtend Power Control series is engineered specifically for this application. It is a modular system that uses remote relay modules connected over a standard IP network. This allows you to place control exactly where it is needed, such as near powered speaker arrays, digital signage, or motorized rigging, without running long electrical circuits back to a central panel.
XPC modules can be deployed with a standalone controller or integrated as an extension of an existing LynTec RPC or NPAC system, providing a scalable solution for facility-wide distributed power control.
How can I sequence power for equipment not in a central rack?
The XPC Xtend Power Control series is engineered specifically for this scenario. It decouples control from the panel, allowing you to place compact, network-managed relay modules exactly where your equipment is located. This is ideal for controlling powered line arrays, digital signage, or remote video displays.
XPC modules can be deployed as a standalone system or integrated as an extension of an existing RPC or NPAC installation, providing sequenced control over your standard IP network.
How is the XPC system configured and programmed?
All configuration for an XPC system is managed through a built-in web server accessible from any standard browser on the network. There is no proprietary software to install. After connecting to the controller’s IP address, you can easily set up circuit sequencing, create schedules with the astronomical clock, define control triggers, and adjust voltage protection thresholds.
What control protocols can I use to trigger XPC sequences?
The XPC system is built for flexible integration into modern control environments. The XPC controller natively supports IP (Telnet), DMX, and sACN for direct control from lighting consoles or AV control systems like Crestron or AMX. It also includes a contact closure interface for simple, dry-contact activation from third-party systems or basic wall switches.
What kind of electrical protection is built into the XPC system?
The XPC system includes integrated over and under-voltage protection to safeguard connected equipment. The controller constantly monitors incoming power. If the voltage moves outside of a user-defined safe operating range, the system will automatically shut down the controlled circuits in a safe sequence to prevent damage to sensitive electronics from power anomalies.
When should I specify an XPC system over a traditional RPC panel?
The XPC series is engineered for projects with geographically distributed equipment. Specify an XPC system when you need to control circuits for devices like powered speakers, digital signage, or motorized rigging that are far from a central electrical room. This modular approach eliminates long, costly home run conduit pulls, simplifying installation and providing greater design flexibility.
When should I use a centralized panel vs. a distributed relay system?
A centralized breaker panel like an RPC or LCP is ideal when most of your circuits originate from a single electrical room. This approach simplifies high-voltage wiring and provides a single point of management for an entire area or venue.
A distributed system like our XPC series is the right choice when you need to control equipment located far from the main panel. By placing XPC remote relay modules near the load (such as powered speakers, digital signage, or architectural lighting), you reduce the need for long, dedicated power runs, saving on conduit and labor costs.
If you have any inquiries about our products, feel free to ask us or visit our help desk for more information.
EXPLORE MORE
Explore other power control series
RPCR
A series of modular relay panels for high-amperage circuit control in installed sound and lighting systems. RPCR panels provide scalable, remotely operated control for 8 to 64 circuits, with options for 2-pole relays and integrated brownout protection.
Switches
Physical control interfaces for LynTec power sequencing systems. Includes key switches, push-button sets, and locking switches in wall-plate and rack-mount form factors for simple, secure system activation.
LCP
Intelligent lighting control panelboards built on reliable motorized breakers. LCP panels provide versatile DMX, sACN, and IP control for performance venues, houses of worship, and architectural applications requiring robust, automated power management for lighting and video walls.
LC
The LC Series provides DMX512-addressable control for lighting circuits using motorized breakers within integrated panelboards and load centers. Engineered for lighting designers and integrators needing direct control over non-dimmed loads from a lighting console.
LCRP
The LCRP series provides DMX-controlled relay panels for switching high-amperage lighting loads. Engineered for permanent installations, these panels offer direct DMX512 control over 30A relays, simplifying the integration of non-dimmable fixtures and effects into a theatrical or architectural lighting system.
MS
The MS Series provides modular sequencing for power control using breaker or relay based panels. Engineered to protect sensitive audio and video systems from damaging inrush currents, these panels ensure a safe, controlled startup and shutdown sequence for all connected equipment.
NPAC
Network-controlled, multi-circuit relay panels for professional AVL racks. NPAC provides programmable power sequencing and remote management in a 2RU chassis, simplifying installation and integrating with DMX, sACN, and IP-based control systems.
PDS
The PDS series provides robust, multi-circuit power sequencing for installations requiring controlled startup and shutdown of equipment. Featuring 30A latching relays, these sequencers protect sensitive electronics from inrush current and ensure stable system operation.
RPC
The RPC series provides a complete, web-enabled power control infrastructure for complex installations. It combines master and secondary panels to manage up to 168 circuits from a single interface, offering robust sequencing, brownout protection, and remote monitoring for performance venues and broadcast facilities.
RC
A family of remote control accessories for the LynTec CQ Series power sequencing ecosystem. RC Series products provide simple, hard-wired control and status monitoring from convenient wall-mount or rack-mount locations.
SGX
The SGX series provides modular, high-performance surge protection for LynTec power control panels. These sidecar units house multiple 20A SurgeX modules, adding robust, multi-stage protection against surges up to 6,000V. SGX modules integrate directly with MSP, LCP, SCP, and RPC panels for a complete power control and protection solution.
RP
Professional-grade rack-mount power distribution units featuring integrated power monitoring, robust surge protection, and a durable Tour Class chassis. Designed for touring rigs and permanent commercial AV installations.
SCV
On-line, double-conversion Uninterruptible Power Supply (UPS) systems designed to provide the highest level of power protection for mission-critical AVL, broadcast, and IT equipment in rack-mount applications.
CQ
The CQ Series offers modular, standalone power sequencers designed for simple and reliable operation. Units can be easily linked with RJ-45 cables to create scalable, synchronized power-up sequences for AV systems of any size, without requiring a central controller.
RX
Professional surge protection and power conditioning for sensitive AV and digital processing systems. The RX series uses a patented Hybrid Filter Technology to protect all three power lines (hot, neutral, ground) from both high-energy surges and low-level line noise.
IP
Network-addressable power control and distribution units designed for remote management and integration with AV control systems. The IP Series allows for control and monitoring over standard IP networks via a web interface, TCP/IP, or UDP for simplified system automation.
JG
The JG Series (Previously JuiceGoose) offers economical and reliable 1U rack-mount power distribution units. Available in 15A and 20A models, these PDUs provide essential spike and noise protection with practical features for straightforward commercial AV installations.
KIN
Compact, line-interactive UPS systems providing reliable battery backup, automatic voltage regulation, and AC power conditioning for professional AV and IT equipment in space-constrained installations.
L
Specialized surge protection modules for low-voltage audio and data signal lines. The L Series is engineered to safeguard sensitive AVL equipment connected via long or outdoor cable runs from lightning-induced electrical surges.
PD
Custom-configured vertical power distribution strips designed for high-density equipment racks. Each unit is built to order with specified circuits, receptacles, and wiring to simplify complex AVL installations and reduce on-site labor.
RT
Simple and reliable remote power control activated by low-voltage contact closure. Engineered for non-networked applications requiring dependable, straightforward power sequencing.
SL
The SL Series offers compact, slim-profile Uninterruptible Power Supplies (UPS) using advanced lithium-ion battery technology. Designed for space-constrained AV installations like digital signage, kiosks, and compact racks.
SQ
A standalone, rack-mounted power sequencer with a three-step delay. Designed for simple, reliable startup and shutdown protection in single-rack AV systems without requiring a master controller.
SRA
The SRA Series offers line-interactive Uninterruptible Power Supplies (UPS) with automatic voltage regulation. Designed for cost-effective protection, these units safeguard sensitive AVL equipment from brownouts and outages, ensuring system uptime with a rack-mountable design.
TC
The Tcom-1 GMT-style fuse and alarm panel for telecommunications and DC power distribution. Redundant circuit protection with remote alarm monitoring in a single 1U platform.
Battery Backup – UPS
Rack-mount and convertible UPS systems designed to provide clean, continuous power for critical AV and IT equipment. LynTec UPS units feature line-interactive and on-line topologies to protect against outages, sags, and swells, ensuring operational continuity for sensitive electronics.
Modules
Field-installable components designed to add specific control, sequencing, or protection capabilities to LynTec power control panels. Modules allow for flexible system expansion and simplified field service.
SC
The SC Series provides simple, reliable RS-232 serial control for branch circuits in panelboards, load centers, and relay panels. It is ideal for integrating power control into legacy automation systems.
SPD
Stand-alone surge protective devices engineered to safeguard sensitive AV, lighting, and broadcast electronics from damaging voltage spikes and power anomalies. Designed for easy integration into existing LynTec power control panels for a complete infrastructure protection strategy.
Upgrade Kit
Modernize existing electrical panels with network control, sequencing, and remote monitoring. LynTec upgrade kits replace legacy controllers in existing enclosures, preserving infrastructure investment while adding modern capabilities.
XLR Accessories
Integrate standard DMX and other 3-pin or 5-pin XLR control signals into your LynTec power control system. These accessories provide reliable, secure connections for triggering sequences and extending control networks within professional AV and lighting installations.
Looking at the XPC series for a project?
Our engineers can help you design a distributed power control system that meets the specific needs of your venue or facility.