LC
DMX-addressable lighting control panels and load centers for direct, individual circuit breaker control from any DMX512 console.
Filter Products
Types
+Power Distribution
+Power Control
+Power Accessories
+Statuses
+Series
+Product Region
+
ABOUT THE LC SERIES
Direct DMX control for every lighting circuit.
Integrate individual branch circuit control directly into your lighting design with DMX-addressable motorized breakers.
The LC Series integrates DMX512 control directly at the breaker level, providing a simple and robust solution for managing non-dimmed lighting loads. By using motorized breakers inside familiar load centers and panelboards, the LC series eliminates the need for separate relay panels, simplifying installation and saving significant wall space.
Each breaker is assigned a unique DMX address, allowing for individual on, off, or no-change commands directly from a lighting console. This gives lighting designers precise control over practicals, work lights, and motorized fixtures, ensuring they are only powered when needed.
WHY IT MATTERS
Engineered for lighting system integration.
01
Native DMX512 control simplifies programming and wiring.
Assign a DMX address to each motorized breaker with simple jumpers. This eliminates complex relay logic and custom programming, allowing direct control from any lighting console.
02
Consolidate power and control into a single panel.
LC Series panelboards and load centers combine distribution and DMX control in one enclosure. This reduces hardware costs, labor, and wall space compared to traditional relay-based systems.
03
Flexible configurations from 4 to 41 circuits per panel.
Choose from relay panels, load centers, or full panelboards to match project scale. Mix controlled and non-controlled circuits in the same panel for a cost-effective, custom solution.
FAQ
Your questions, answered.
Common questions about DMX-controlled circuit breakers.
Can I use both controlled and standard breakers in the same LC panel?
Yes. LC Series panels are engineered for flexibility. You can mix DMX-controlled motorized breakers with standard, non-controlled breakers in the same enclosure. This allows you to create a cost-effective solution that provides direct DMX control only for the specific circuits that require it, such as non-dimmed fixtures, work lights, or practicals.
How do I assign DMX addresses to the motorized breakers?
Each motorized breaker in an LC Series panel is addressed using simple jumpers on its control board. You set the DMX start address for the first breaker, and each subsequent controlled breaker is automatically assigned the next sequential address. This design simplifies commissioning and makes it easy to integrate into your lighting control system without complex software configuration.
What DMX values are used to turn the breakers on and off?
The control logic is simple and intuitive for lighting programmers. For each assigned DMX address, a value of 127 or lower sends an ‘off’ command to the breaker. A value of 128 or higher sends an ‘on’ command. This clear threshold makes programming from any standard lighting console quick and reliable.
What happens to the circuits if the DMX control signal is lost?
If the DMX signal is lost, the LC Series breakers are designed to hold their last state. This feature ensures that lighting or other controlled loads are not unintentionally turned on or off during a signal interruption from the console. This provides stable and predictable performance in any live environment.
What panelboard configurations are available for the LC Series?
LC Series control is available in several form factors to match project scale. You can specify it within compact load centers for smaller applications or in full-sized panelboards for systems requiring up to 41 controlled circuits. This modularity ensures a proper fit for a wide range of installation environments and system sizes.
Why use an LC panel instead of a separate DMX relay panel?
The LC Series integrates DMX control and power distribution into a single, familiar panelboard. This approach saves significant wall space, reduces hardware costs, and simplifies installation by eliminating the need to wire between a main distribution panel and a secondary relay panel. It creates a cleaner, more efficient, and robust power infrastructure for your lighting system.
If you have any inquiries about our products, feel free to ask us or visit our help desk for more information.
EXPLORE MORE
Browse other series
RPCR
A series of modular relay panels for high-amperage circuit control in installed sound and lighting systems. RPCR panels provide scalable, remotely operated control for 8 to 64 circuits, with options for 2-pole relays and integrated brownout protection.
Switches
Physical control interfaces for LynTec power sequencing systems. Includes key switches, push-button sets, and locking switches in wall-plate and rack-mount form factors for simple, secure system activation.
LCP
Intelligent lighting control panelboards built on reliable motorized breakers. LCP panels provide versatile DMX, sACN, and IP control for performance venues, houses of worship, and architectural applications requiring robust, automated power management for lighting and video walls.
LCRP
The LCRP series provides DMX-controlled relay panels for switching high-amperage lighting loads. Engineered for permanent installations, these panels offer direct DMX512 control over 30A relays, simplifying the integration of non-dimmable fixtures and effects into a theatrical or architectural lighting system.
MS
The MS Series provides modular sequencing for power control using breaker or relay based panels. Engineered to protect sensitive audio and video systems from damaging inrush currents, these panels ensure a safe, controlled startup and shutdown sequence for all connected equipment.
NPAC
Network-controlled, multi-circuit relay panels for professional AVL racks. NPAC provides programmable power sequencing and remote management in a 2RU chassis, simplifying installation and integrating with DMX, sACN, and IP-based control systems.
PDS
The PDS series provides robust, multi-circuit power sequencing for installations requiring controlled startup and shutdown of equipment. Featuring 30A latching relays, these sequencers protect sensitive electronics from inrush current and ensure stable system operation.
RPC
The RPC series provides a complete, web-enabled power control infrastructure for complex installations. It combines master and secondary panels to manage up to 168 circuits from a single interface, offering robust sequencing, brownout protection, and remote monitoring for performance venues and broadcast facilities.
RC
A family of remote control accessories for the LynTec CQ Series power sequencing ecosystem. RC Series products provide simple, hard-wired control and status monitoring from convenient wall-mount or rack-mount locations.
SGX
The SGX series provides modular, high-performance surge protection for LynTec power control panels. These sidecar units house multiple 20A SurgeX modules, adding robust, multi-stage protection against surges up to 6,000V. SGX modules integrate directly with MSP, LCP, SCP, and RPC panels for a complete power control and protection solution.
XPC
A modular power control system that extends intelligent sequencing to remote locations. XPC uses a central controller to manage a network of relay modules, allowing integrators to place control exactly where equipment is located, independent of the main breaker panel.
RP
Professional-grade rack-mount power distribution units featuring integrated power monitoring, robust surge protection, and a durable Tour Class chassis. Designed for touring rigs and permanent commercial AV installations.
SCV
On-line, double-conversion Uninterruptible Power Supply (UPS) systems designed to provide the highest level of power protection for mission-critical AVL, broadcast, and IT equipment in rack-mount applications.
CQ
The CQ Series offers modular, standalone power sequencers designed for simple and reliable operation. Units can be easily linked with RJ-45 cables to create scalable, synchronized power-up sequences for AV systems of any size, without requiring a central controller.
RX
Professional surge protection and power conditioning for sensitive AV and digital processing systems. The RX series uses a patented Hybrid Filter Technology to protect all three power lines (hot, neutral, ground) from both high-energy surges and low-level line noise.
IP
Network-addressable power control and distribution units designed for remote management and integration with AV control systems. The IP Series allows for control and monitoring over standard IP networks via a web interface, TCP/IP, or UDP for simplified system automation.
JG
The JG Series (Previously JuiceGoose) offers economical and reliable 1U rack-mount power distribution units. Available in 15A and 20A models, these PDUs provide essential spike and noise protection with practical features for straightforward commercial AV installations.
KIN
Compact, line-interactive UPS systems providing reliable battery backup, automatic voltage regulation, and AC power conditioning for professional AV and IT equipment in space-constrained installations.
L
Specialized surge protection modules for low-voltage audio and data signal lines. The L Series is engineered to safeguard sensitive AVL equipment connected via long or outdoor cable runs from lightning-induced electrical surges.
PD
Custom-configured vertical power distribution strips designed for high-density equipment racks. Each unit is built to order with specified circuits, receptacles, and wiring to simplify complex AVL installations and reduce on-site labor.
RT
Simple and reliable remote power control activated by low-voltage contact closure. Engineered for non-networked applications requiring dependable, straightforward power sequencing.
SL
The SL Series offers compact, slim-profile Uninterruptible Power Supplies (UPS) using advanced lithium-ion battery technology. Designed for space-constrained AV installations like digital signage, kiosks, and compact racks.
SQ
A standalone, rack-mounted power sequencer with a three-step delay. Designed for simple, reliable startup and shutdown protection in single-rack AV systems without requiring a master controller.
SRA
The SRA Series offers line-interactive Uninterruptible Power Supplies (UPS) with automatic voltage regulation. Designed for cost-effective protection, these units safeguard sensitive AVL equipment from brownouts and outages, ensuring system uptime with a rack-mountable design.
TC
The Tcom-1 GMT-style fuse and alarm panel for telecommunications and DC power distribution. Redundant circuit protection with remote alarm monitoring in a single 1U platform.
Battery Backup – UPS
Rack-mount and convertible UPS systems designed to provide clean, continuous power for critical AV and IT equipment. LynTec UPS units feature line-interactive and on-line topologies to protect against outages, sags, and swells, ensuring operational continuity for sensitive electronics.
Modules
Field-installable components designed to add specific control, sequencing, or protection capabilities to LynTec power control panels. Modules allow for flexible system expansion and simplified field service.
SC
The SC Series provides simple, reliable RS-232 serial control for branch circuits in panelboards, load centers, and relay panels. It is ideal for integrating power control into legacy automation systems.
SPD
Stand-alone surge protective devices engineered to safeguard sensitive AV, lighting, and broadcast electronics from damaging voltage spikes and power anomalies. Designed for easy integration into existing LynTec power control panels for a complete infrastructure protection strategy.
Upgrade Kit
Modernize existing electrical panels with network control, sequencing, and remote monitoring. LynTec upgrade kits replace legacy controllers in existing enclosures, preserving infrastructure investment while adding modern capabilities.
XLR Accessories
Integrate standard DMX and other 3-pin or 5-pin XLR control signals into your LynTec power control system. These accessories provide reliable, secure connections for triggering sequences and extending control networks within professional AV and lighting installations.
Looking at the LC series for a project?
Our team can help you specify the right DMX-controlled panelboard or load center for your lighting system design.