Skip to main content
Closed Opens tomorrow 8 AM +1 913-529-2233
    Back

    XLR Accessories

    Reliable XLR connectors, wall plates, and termination accessories for integrating DMX and other control signals into LynTec power systems.
    Search
    Filter
    No products found. Reset Filters

    Filter Products

    Types
    +
    Power Distribution
    +
    Power Control
    +
    Power Accessories
    +
    Statuses
    +
    Series
    +
    Product Region
    +
    Showing 0 of 0 products
    ABOUT XLR ACCESSORIES

    Connect your control layer to your power infrastructure.

    Extend the reach and reliability of your control network with accessories engineered to maintain signal integrity from the console to the power panel.

    In a professional installation, the connection between your control system and your power infrastructure is a critical point of failure. Standard, off-the-shelf XLR components may not offer the durability or termination quality required for permanent, code-compliant installations. LynTec XLR accessories are designed to solve this by providing a robust, reliable link for DMX-512, RDM, and other control protocols.

    From wall plates for clean architectural integration to durable connectors and terminators, each component is built for system compatibility and long-term performance. This ensures your control signals are delivered without degradation, providing predictable and consistent operation of your entire LynTec power control ecosystem.

    WHY IT MATTERS

    Engineered for the complete system.

    01

    Guaranteed system compatibility.

    Designed and tested to work seamlessly within the LynTec ecosystem. Ensure reliable DMX and RDM communication with your RPC, RPCR, and LCP series panels without signal loss or protocol conflicts.
    02

    Simplified, robust installation.

    Featuring standard form factors for wall plates and durable connectors with clear termination points. Built for integrators to install quickly and confidently, reducing on-site troubleshooting and service calls.
    03

    Built for long-term reliability.

    Constructed from high-quality materials to withstand the demands of permanent installations. These accessories maintain secure connections and signal integrity over years of operation, protecting your control network.
    FAQ

    Your questions, answered.

    Common questions about integrating control signals with LynTec systems.
    Are these accessories suitable for permanent, in-wall installation?

    Absolutely. Our XLR accessories, particularly the wall plates, are designed specifically for permanent architectural integration. They use standard form factors for easy installation in common back boxes and are constructed from durable materials to meet the demands of commercial environments. This provides a clean, professional, and reliable connection point between your control system and the LynTec power infrastructure.

    Do I need a DMX terminator when connecting to a LynTec panel?

    Yes, following DMX-512 best practices is critical for reliable communication. A DMX terminator (a 120-ohm resistor) should always be placed on the last device in a DMX chain. Our XLR accessories include options for termination, allowing you to properly complete the DMX signal path at the final wall plate or panel connection point. This prevents signal reflections that can cause erratic control behavior.

    What control protocols are supported through your XLR accessories?

    Our XLR accessories are designed to maintain signal integrity for any standard 3-pin or 5-pin XLR-based control protocol. They are primarily used for DMX-512 and RDM to trigger sequences and control zones on compatible LynTec panels. The robust construction ensures that the physical connection is reliable, allowing your chosen control protocol to communicate without interference or signal loss.

    Which LynTec panels can I control using these DMX accessories?

    These accessories are designed to provide a DMX-512 control input for any LynTec panel equipped with a DMX card or native DMX port. This includes our most common motorized circuit breaker and relay panels, such as the RPC, RPCR, and LCP series. Using our wall plates and connectors ensures a clean and reliable termination point for the control signal run to the panel.

    Why use LynTec XLR accessories instead of standard off-the-shelf parts?

    LynTec XLR accessories are engineered and tested for guaranteed compatibility within our power control ecosystem. They ensure reliable DMX and RDM communication with panels like the RPC and RPCR series, preventing signal degradation. Built from high-quality materials, they provide durable, secure connections designed for permanent, long-term installations, which reduces troubleshooting and service calls compared to generic components.

    If you have any inquiries about our products, feel free to ask us or visit our help desk for more information.
    EXPLORE MORE

    Browse other series

    RPCR

    A series of modular relay panels for high-amperage circuit control in installed sound and lighting systems. RPCR panels provide scalable, remotely operated control for 8 to 64 circuits, with options for 2-pole relays and integrated brownout protection.
    Browse

    Switches

    Physical control interfaces for LynTec power sequencing systems. Includes key switches, push-button sets, and locking switches in wall-plate and rack-mount form factors for simple, secure system activation.
    Browse

    LCP

    Intelligent lighting control panelboards built on reliable motorized breakers. LCP panels provide versatile DMX, sACN, and IP control for performance venues, houses of worship, and architectural applications requiring robust, automated power management for lighting and video walls.
    Browse

    LC

    The LC Series provides DMX512-addressable control for lighting circuits using motorized breakers within integrated panelboards and load centers. Engineered for lighting designers and integrators needing direct control over non-dimmed loads from a lighting console.
    Browse

    LCRP

    The LCRP series provides DMX-controlled relay panels for switching high-amperage lighting loads. Engineered for permanent installations, these panels offer direct DMX512 control over 30A relays, simplifying the integration of non-dimmable fixtures and effects into a theatrical or architectural lighting system.
    Browse

    MS

    The MS Series provides modular sequencing for power control using breaker or relay based panels. Engineered to protect sensitive audio and video systems from damaging inrush currents, these panels ensure a safe, controlled startup and shutdown sequence for all connected equipment.
    Browse

    NPAC

    Network-controlled, multi-circuit relay panels for professional AVL racks. NPAC provides programmable power sequencing and remote management in a 2RU chassis, simplifying installation and integrating with DMX, sACN, and IP-based control systems.
    Browse

    PDS

    The PDS series provides robust, multi-circuit power sequencing for installations requiring controlled startup and shutdown of equipment. Featuring 30A latching relays, these sequencers protect sensitive electronics from inrush current and ensure stable system operation.
    Browse

    RPC

    The RPC series provides a complete, web-enabled power control infrastructure for complex installations. It combines master and secondary panels to manage up to 168 circuits from a single interface, offering robust sequencing, brownout protection, and remote monitoring for performance venues and broadcast facilities.
    Browse

    RC

    A family of remote control accessories for the LynTec CQ Series power sequencing ecosystem. RC Series products provide simple, hard-wired control and status monitoring from convenient wall-mount or rack-mount locations.
    Browse

    SGX

    The SGX series provides modular, high-performance surge protection for LynTec power control panels. These sidecar units house multiple 20A SurgeX modules, adding robust, multi-stage protection against surges up to 6,000V. SGX modules integrate directly with MSP, LCP, SCP, and RPC panels for a complete power control and protection solution.
    Browse

    XPC

    A modular power control system that extends intelligent sequencing to remote locations. XPC uses a central controller to manage a network of relay modules, allowing integrators to place control exactly where equipment is located, independent of the main breaker panel.
    Browse

    RP

    Professional-grade rack-mount power distribution units featuring integrated power monitoring, robust surge protection, and a durable Tour Class chassis. Designed for touring rigs and permanent commercial AV installations.
    Browse

    SCV

    On-line, double-conversion Uninterruptible Power Supply (UPS) systems designed to provide the highest level of power protection for mission-critical AVL, broadcast, and IT equipment in rack-mount applications.
    Browse

    CQ

    The CQ Series offers modular, standalone power sequencers designed for simple and reliable operation. Units can be easily linked with RJ-45 cables to create scalable, synchronized power-up sequences for AV systems of any size, without requiring a central controller.
    Browse

    RX

    Professional surge protection and power conditioning for sensitive AV and digital processing systems. The RX series uses a patented Hybrid Filter Technology to protect all three power lines (hot, neutral, ground) from both high-energy surges and low-level line noise.
    Browse

    IP

    Network-addressable power control and distribution units designed for remote management and integration with AV control systems. The IP Series allows for control and monitoring over standard IP networks via a web interface, TCP/IP, or UDP for simplified system automation.
    Browse

    JG

    The JG Series (Previously JuiceGoose) offers economical and reliable 1U rack-mount power distribution units. Available in 15A and 20A models, these PDUs provide essential spike and noise protection with practical features for straightforward commercial AV installations.
    Browse

    KIN

    Compact, line-interactive UPS systems providing reliable battery backup, automatic voltage regulation, and AC power conditioning for professional AV and IT equipment in space-constrained installations.
    Browse

    L

    Specialized surge protection modules for low-voltage audio and data signal lines. The L Series is engineered to safeguard sensitive AVL equipment connected via long or outdoor cable runs from lightning-induced electrical surges.
    Browse

    PD

    Custom-configured vertical power distribution strips designed for high-density equipment racks. Each unit is built to order with specified circuits, receptacles, and wiring to simplify complex AVL installations and reduce on-site labor.
    Browse

    RT

    Simple and reliable remote power control activated by low-voltage contact closure. Engineered for non-networked applications requiring dependable, straightforward power sequencing.
    Browse

    SL

    The SL Series offers compact, slim-profile Uninterruptible Power Supplies (UPS) using advanced lithium-ion battery technology. Designed for space-constrained AV installations like digital signage, kiosks, and compact racks.
    Browse

    SQ

    A standalone, rack-mounted power sequencer with a three-step delay. Designed for simple, reliable startup and shutdown protection in single-rack AV systems without requiring a master controller.
    Browse

    SRA

    The SRA Series offers line-interactive Uninterruptible Power Supplies (UPS) with automatic voltage regulation. Designed for cost-effective protection, these units safeguard sensitive AVL equipment from brownouts and outages, ensuring system uptime with a rack-mountable design.
    Browse

    TC

    The Tcom-1 GMT-style fuse and alarm panel for telecommunications and DC power distribution. Redundant circuit protection with remote alarm monitoring in a single 1U platform.
    Browse

    Battery Backup – UPS

    Rack-mount and convertible UPS systems designed to provide clean, continuous power for critical AV and IT equipment. LynTec UPS units feature line-interactive and on-line topologies to protect against outages, sags, and swells, ensuring operational continuity for sensitive electronics.
    Browse

    Modules

    Field-installable components designed to add specific control, sequencing, or protection capabilities to LynTec power control panels. Modules allow for flexible system expansion and simplified field service.
    Browse

    SC

    The SC Series provides simple, reliable RS-232 serial control for branch circuits in panelboards, load centers, and relay panels. It is ideal for integrating power control into legacy automation systems.
    Browse

    SPD

    Stand-alone surge protective devices engineered to safeguard sensitive AV, lighting, and broadcast electronics from damaging voltage spikes and power anomalies. Designed for easy integration into existing LynTec power control panels for a complete infrastructure protection strategy.
    Browse

    Upgrade Kit

    Modernize existing electrical panels with network control, sequencing, and remote monitoring. LynTec upgrade kits replace legacy controllers in existing enclosures, preserving infrastructure investment while adding modern capabilities.
    Browse

    Looking at XLR accessories for a project?

    Our team can help you select the right wall plates, connectors, and terminators to ensure reliable control signal distribution for your LynTec installation.
    Request a Quote
    Find A Representative