Skip to main content
Closed Opens at 8 AM +1 913-529-2233
    SKU: SCP Region: North America
    Contact Us
    SKU: SCP Region: North America

    SCP Series Serial Controlled Panelboard

    RS-232 controlled motorized breaker panels for legacy system integration.

    The SCP Series is a motorized circuit breaker panelboard providing individual circuit control over a standard RS-232 serial connection for simplified automation. It is designed for installations requiring direct serial integration with building management or legacy control systems without needing a network-based infrastructure.

    Request a Quote

    Request A Quote

    Request more information about this product or speak directly with our sales team today.

    This field is for validation purposes and should be left unchanged.
    We route your message directly to the right team so you don’t get bounced around.

    Where To Buy
    Engineered for Simplicity and Reliability

    Control

    RS-232 Serial

    Breaker Type

    Motorized

    Poles

    1, 2, or 3-Pole

    Integration

    Legacy BMS

    Key Feature

    Space-Saving
    SCP SYSTEM OVERVIEW

    Reliable circuit control for serial-based systems.

    The LynTec SCP Series provides a straightforward, robust solution for managing electrical circuits in environments standardized on RS-232 serial control. By integrating motorized breakers directly into a Square-D panelboard, the SCP eliminates the need for separate relay panels, saving significant wall space and reducing installation complexity and cost. This design is ideal for retrofits or new installations that must interface with legacy building management or automation systems. Each panel is engineered for long-term reliability, running cool and efficiently without the holding current required by traditional relays, ensuring dependable power management with a simple, proven control interface.

    SYSTEM INTEGRATION

    Integrate the SCP with your facility controls.

    The SCP series is designed to connect with serial-based automation and management systems.

    Legacy Control Systems

    Provides a direct command interface for automation systems from Crestron, AMX, and others that use RS-232 for device control.

    Building Management Systems (BMS)

    Connects seamlessly with building automation platforms that rely on serial communication for managing electrical loads.

    SurgeX In-Panel Modules

    Integrate an optional SurgeX module directly within the SCP panel to protect every connected circuit from damaging surges.

    IPC Integrated Power Center

    Combine an SCP panel with an isolation transformer in a single floor-standing unit for noise-sensitive applications.
    CONFIGURATION OPTIONS

    Configure your SCP panel.

    Every SCP panel is built to order. Use these categories to define the right panel for your installation.
    Available Models

    Panel models are determined by the main electrical service rating and physical size.

    • SCP 139/338 Series: Designed for installations with main breakers rated at 100A or less.
    • SCP 141/341 Series: Larger panels built for main breakers rated over 100A, providing more circuit capacity.
    Breaker Configurations

    Customize the panel to match your exact circuit control needs.

    • Motorized Breakers: Select the number of RS-232 controlled circuits required for your automated loads.
    • Standard Breakers: Fill remaining slots with standard QO breakers for always-on or manually switched circuits.
    • Pole Options: Controlled breakers are available in 1, 2, or 3-pole configurations to match load requirements.
    Control & Integration

    The SCP is designed for simple, direct control integration.

    • RS-232 Addressing: A simple jumper on the SC-10 control board sets the starting address for all motorized breakers.
    • BMS Integration: Provides a direct serial command interface for most building management and legacy automation systems.
    Optional Modules

    Enhance panel protection and visibility with factory-installed options.

    • SurgeX In-Panel Protection: Add best-in-class surge elimination to protect all connected equipment from a single point.
    • Branch Current Monitoring: Provides insight into the power draw of individual circuits for diagnostics and management.
    FLEXIBLE CONFIGURATIONS

    Build Your SCP System

    Select the appropriate SCP panel for your application, then add optional enhancements like the IPC for integrated transformer and breaker functionality.
    Required

    SCP Series Panels

    Choose the appropriate SCP panel based on your main breaker amperage and circuit count requirements.
    WHY LYNTEC

    Simplified power control, built to last.

    • Saves space and hardware costs by design
    • Engineered for simple setup and long-term reliability
    • Energy-efficient operation reduces heat and utility costs
    • Built on the trusted Square-D panelboard platform
    FEATURES

    SCP Series Features

    Explore the standard capabilities engineered into every SCP serial controlled panel.
    CAPABILITIES

    Features

    Simple RS-232 Addressing

    An easy-to-use jumper system sets the starting address for sequential circuit control.

    Individual or Zone Control

    Gives programmers the flexibility to manage single circuits or entire groups with one command.

    Energy Efficient Operation

    Motorized breakers use no power to maintain their state, reducing heat and energy costs.

    Simplified Installation

    Designed for easy setup with no on-site commissioning or factory start-up required.

    Automatic Load Shedding

    A standard feature to intelligently manage power consumption during peak demand.

    Brownout Protection

    Provides a safe, automatic shutdown sequence during under-voltage events to protect equipment.

    Optional SurgeX Protection

    Add industrial-grade in-panel surge elimination to safeguard connected systems.

    Optional Current Monitoring

    Gain visibility into the power consumption of individual branch circuits.
    01

    Direct Serial Control

    Integrate directly with legacy automation and building management systems using the industry-standard RS-232 protocol, no network required.
    • Simple jumper-based addressing
    • Individual or zone control of circuits
    • Straightforward on, off, or no-change commands
    02

    Integrated, Space-Saving Design

    Combines a breaker panel and relay controls into a single enclosure, saving valuable wall space and reducing hardware and installation costs.
    • Eliminates need for separate relay panels
    • Spacious enclosure for easier installation
    • Mix motorized and standard breakers in one panel
    03

    Efficient and Built to Last

    Motorized breakers require no holding current to maintain their state, resulting in a cooler, more energy-efficient, and longer-lasting system.
    • No holding current or heat sinks needed
    • Standard brownout and power-outage shutdown
    • Optional bolt-on breakers for robust connections
    SPECIFICATIONS

    SCP Series Specifications

    Review the electrical, control, and physical specifications for the SCP panelboard family.
    PRIMARY PANELS

    SCP Series Panels

    Choose the appropriate SCP panel based on your main breaker amperage and circuit count requirements.

    Model Max Main Breaker Max Circuits
    SCP 139-xx 100A 42
    SCP 141-xx 225A 42
    SCP 338-xx 100A 84
    SCP 341-xx 225A 84

    Shared SCP Series Specifications

    Technical details common across all SCP panel configurations. Specific model capacities vary.

    Control

    • Primary Protocol
      RS-232 Serial
    • Addressing
      Jumper-selectable start address
    • Commands
      On, Off, No Change

    Electrical

    • Breaker Type
      Motorized (MB and BMB Series)
    • Available Amperage
      15A, 20A, 30A
    • Pole Configurations
      1-pole, 2-pole, 3-pole
    • Neutrals
      200% standard

    Physical

    • Panelboard Platform
      Built on the Square-D Powerlink Platform
    • Breaker Connection
      Plug-on (standard), Bolt-on (optional)

    Questions or Concerns?

    Let us know, we’re here to help! Contact Us

    PRODUCT SUPPORT

    SCP Series Support

    Find documentation, guides, and answers to common questions about SCP panelboards.
    VIDEOS

    Setup & training video series.

    EPISODE 1 / 1 · 9:27
    Building a Controllable Breaker Panel Part Number
    DOCUMENTS

    Manuals, guides, and factsheets.

    Manuals
    Optional Features
    Datasheets
    FAQ

    FAQs about the SCP Series

    Can I mix controlled and standard breakers in one SCP panel?

    Yes. The SCP panelboard is designed to accommodate both motorized breakers for remote control and standard Square-D QO breakers for circuits that do not require automation. This allows you to create a single-panel solution for all your power distribution needs.

    How do I set the addresses for the controlled circuits?

    Addressing is set physically using a simple jumper system on the LynTec SC-10 control board inside the panel. Once you set the starting address, each subsequent motorized breaker is assigned the next address in sequence, simplifying programming.

    What options can be added to an SCP panel?

    You can enhance your SCP panel with factory-installed SurgeX in-panel surge elimination for robust protection and optional branch circuit current monitoring for greater visibility into your power system’s performance.

    When should I choose an SCP panel instead of a networked RPC panel?

    The SCP Series is specifically designed for projects that require direct integration with a legacy control or building management system using an RS-232 serial connection. If your project uses modern network protocols like sACN, BACnet, or IP, the RPC Series would be a better fit.

    NEXT Features
    BACK Overview NEXT Specifications
    BACK Features NEXT Product Support
    BACK Specifications NEXT Contact Us

    Need to integrate with a legacy system?

    Our team can help you specify the right SCP panel configuration for your project. Get a quote and submittal-ready drawings for your next installation.

    Request a Quote
    Find a Representative