Skip to main content
Closed Opens at 8 AM +1 913-529-2233
    SKU: RC5RM-RS Market: North America Series: RC
    Contact Us
    SKU: RC5RM-RS Market: North America Series: RC

    RC5 Rack-Mount Remote with Rotary Switch

    A rack-mount remote trigger for CQ Series sequencers with rotary switch control.

    The RC5-RM-RS is a rack-mount remote control accessory that provides simple, convenient sequence up, down, and pause triggers for any connected CQ Series sequencer. It is designed for installations where direct, non-secure access is preferred, simplifying system operation for venue staff without needing a key or access code.

    Request a Quote

    Request A Quote

    Request more information about this product or speak directly with our sales team today.

    This field is for validation purposes and should be left unchanged.
    We route your message directly to the right team so you don’t get bounced around.

    Where To Buy
    A family of remote control accessories for the LynTec CQ Series power sequencing ecosystem. RC Series products provide simple, hard-wired control and status monitoring from convenient wall-mount or rack-mount locations.
    Convenient Control and Clear Status

    Compatibility

    CQ Series

    Form Factor

    Rack-Mount

    Control Type

    Rotary Switch

    Connection

    RJ-45
    CQ SERIES ACCESSORY

    Rack-mount control of your CQ series power sequencing system.

    The RC5-RM-RS provides straightforward, at-a-glance remote control for LynTec CQ Series power sequencers. Designed for standard 19-inch racks, this accessory allows operators to initiate sequence up, sequence down, or pause operations with a simple rotary switch. It is the ideal control interface for environments where security is not a primary concern and ease of use is paramount.

    Installation is streamlined, requiring an 8-wire cable with RJ-45 connector to connect to the CQ system, with no need for an external power supply. Onboard LED indicators provide clear visual feedback on sequence operation, completion, and overall system status, giving users confidence that their commands have been executed correctly.

    SYSTEM INTEGRATION

    Build out your CQ sequencing system.

    The RC5-RM-RS is designed to work seamlessly with the LynTec CQ Series ecosystem.

    LynTec CQ Series Sequencers

    The designated host device. The RC5-RM-RS connects directly to any CQ model’s control input port.

    RCDM3 Remote Control Combiner

    Integrate this module to allow up to three separate RC5 remotes to control a single CQ system.

    Standard 19-Inch Equipment Racks

    The chassis is built to install cleanly into any standard EIA equipment rack.
    WHY LYNTEC

    Reliable control, simplified.

    • Plug-and-play setup with a single 8-wire cable with RJ-45 connector
    • No external power supply needed, reducing installation complexity
    • Clear LED status indicators for operational confidence
    • Built to integrate seamlessly with the CQ Series ecosystem
    FEATURES

    RC5-RM-RS Features

    An overview of the standard capabilities built into this simple and reliable remote control.
    CAPABILITIES

    Features

    Three-Position Rotary Switch

    Provides intuitive control to sequence up, sequence down, or pause the system.

    LED Status Indicators

    Clear visual feedback for sequence operation, completion, and overall system health.

    Simple RJ-45 Connection

    Connects to the CQ Series input port using a standard network patch cable.

    No External Power Required

    Draws operating power directly from the connected CQ unit, simplifying installation.

    Rack-Mount Chassis

    Designed to integrate cleanly into any standard 19-inch equipment rack.

    Cost-Effective Control

    An economical solution for adding convenient remote trigger points to a CQ system.
    01

    Plug-and-Play Installation

    Connects to any CQ Series sequencer with a single, standard RJ-45 cable, drawing power directly from the host unit for a clean and simple setup.
    • No external power supply required
    • Uses standard, readily available cabling
    • Simplifies system wiring and reduces labor
    02

    At-a-Glance System Status

    Integrated LED indicators provide immediate visual confirmation of the system’s state, so operators can act with confidence.
    • Indicator for sequence in operation
    • Indicator for sequence completion
    • Indicator for general system status
    03

    Intuitive Rotary Control

    A simple three-position rotary switch provides unambiguous control over sequencing, ideal for non-technical users in performance venues or houses of worship.
    • Clearly labeled Sequence Up and Down positions
    • Center Pause position to halt operations
    • Durable switch designed for long-term use
    SPECIFICATIONS

    RC5-RM-RS Specifications

    All the connection and physical details needed for system design and installation.

    RC5-RM-RS Remote Control Specifications

    Technical details for integrating the RC5-RM-RS into your installation.

    Control and Indicators

    • Control Interface
      3-Position Rotary Switch
    • Switch Functions
      Sequence Up, Sequence Down, Pause
    • LED Indicators
      Sequence Operation, Sequence Completion, System Status

    Physical and Electrical

    • Form Factor
      Rack-Mount
    • Connection
      1x RJ-45 to CQ Series Input Port
    • Power Source
      Powered by connected CQ Series unit

    Questions or Concerns?

    Let us know, we’re here to help! Contact Us

    PRODUCT SUPPORT

    RC5-RM-RS Support

    Find documentation and answers to common questions about installing and using your remote control.
    WHITE PAPERS

    Deep dives & technical reads.

    View all White Papers
    FAQ

    FAQs about the RC5-RM-RS

    Can I use multiple RC5 remotes to control one CQ system?

    Yes, a CQ sequencing system can be controlled from up to three different locations by using the RCDM3 remote control combiner accessory. This allows for flexible control points throughout a facility.

    How does the RC5-RM-RS connect to a CQ sequencer?

    The RC5-RM-RS connects to the input control port on a CQ Series model using a single, standard RJ-45 network patch cable. It requires no separate power supply, as it draws power directly from the connected CQ unit.

    What do the LED lights on the front panel indicate?

    The three LEDs provide at-a-glance system status. They indicate when a sequence is currently in operation, when a sequence has fully completed, and the general operational status of the connected CQ system.

    What is the difference between the RC5-RM-RS and the RC5-RM?

    The primary difference is the control method. The RC5-RM-RS uses a rotary switch for control, which is ideal for non-secure locations. The RC5-RM uses a key switch to prevent unauthorized operation of the sequencing system.

    NEXT Features
    BACK Overview NEXT Specifications
    BACK Features NEXT Product Support
    BACK Specifications NEXT Contact Us

    Need to add remote control to your CQ system?

    Our team can help you select the right remote control accessories for your venue’s operational needs. Contact us for guidance on your power control design.

    Request a Quote
    Find a Representative